Optimization of Solar Photovoltaic Systems Using Advanced Bypass Diode Architectures
Downloads
Keywords
Article Usage Chart
Abstract
The performance of solar photovoltaic (PV) systems is critically influenced by partial shading, module mismatch, and environmental factors, which can lead to substantial energy losses. Advanced bypass diode architectures offer an effective means of mitigating these challenges by providing alternate current paths and preventing localized hot spots. This research investigates the optimization of PV systems through the integration of strategically designed bypass diodes, analyzing their impact on energy yield, system reliability, and overall operational efficiency. A systematic synthesis of existing studies demonstrates that optimized diode placement and circuit architecture significantly enhance module output under variable irradiance and temperature conditions. The paper further evaluates thermal management strategies, simulated shading scenarios, and electrical characterization techniques, culminating in an evidence-based framework for improving solar panel performance in practical deployments.
Downloads
References
1. Ababacar Ndiaye, Cheikh M. F. Kébé, Pape A. Ndiaye, Abdérafi Charki, Abdessamad Kobi and Vincent Sambou, "Impact of dust on the photovoltaic (PV) modules characteristics after an exposition year in Sahelian environment: The case of Senegal," International Journal of Physical Sciences, vol. 8, pp. 1166-1173, 2013.
2. Ibrahim, "Analysis of Electrical Characteristics of Photovoltaic Single Crystal Silicon Solar Cells at Outdoor Measurements," Smart Grid and Renewable Energy, vol. 2, pp. 169-175, 2011.
3. Amardeep Chaudhary, Shriya Gupta, Dhriti Pande, Fazal Mahfooz, Gunjan Varshney, "Effect of Partial Shading on Characteristics of PV panel using Simscape," International Journal of Engineering Research and Applications, vol. 5, pp. 85-89, 2015.
4. AyGegül TaGçJoLlu, Onur TaGkJn, and Ali Vardar, "A Power Case Study for Monocrystalline and Polycrystalline Solar Panels in Bursa City, Turkey," International Journal of Photoenergy, vol. 2016, pp. 1-7, 2016.
5. Budiyanto, Fadliondi, “The Improvement of Solar Cell Output Power Using Cooling and Reflection from Mirror,” International Journal of Power Electronics and Drive System, vol. 8, pp. 1320-1326, 2017.
6. Dharmendra Thakur, Amit Arnav, Abhishek Datta, E.V.V Ramanamurthy, "A Review on Immersion System to increase the efficiency of Solar Panels," International Journal of Advanced Research, vol. 4, pp. 312-325, 2016.
7. Fadliondi, "The Humidity Dependence of Pentacene Organic Metal-Oxide-Semiconductor Field-Effect Transistor,” TELKOMNIKA, vol. 15, pp. 578-583, 2017.
8. Furkan Dinçer, Mehmet Emin Meral, "Critical Factors that Affecting Efficiency of Solar Cells," Smart Grid and Renewable Energy, vol. 1, pp. 47-50, 2010.
9. Garo Pilawjian, "Analysis of Photovoltaic Concentrating Solar Energy Systems," ARPN Journal of Systems and Software, vol. 2, pp. 110-112, 2012.
10. Jeyakumar Ramanujam, Udai P. Singh, "Copper indium gallium selenide based solar cells–a review," Energy & Environmental Science, vol. 10, pp. 1306-1319, 2017.
11. M. Belarbi, A. Benyoucef, B. Benyoucef, "Study Of The Equivalent Circuit Of A Dyesensitized Solar Cells," Advanced Energy: An International Journal, vol. 1, pp. 1-8, 2014.
12. M. Chegaar, A. Hamzaoui, A. Namoda, P. Petit, M. Aillerie, A. Herguth, "Effect of illumination intensity on solar cells parameters," Energy Procedia, vol. 36, pp. 722-729, 2013.
13. Michael D. Oisamoje, Esther Eguono Oisamoje, "Exploring the Economic and Environmental Benefits of Solar Energy Generation in Developing Countries: The Nigerian Perspective," Journal of Energy Technologies and Policy, vol. 3, pp. 23-30, 2013.
14. N.L.Panwar, S.C.Kaushik, Surendra Kothari, "Role of renewable energy sources in environmental protection: A review," Renewable and Sustainable Energy Reviews, vol. 15, pp. 1513-1524, 2011.
15. Nair Milind, Midhun Antony, Febin Francis, Jithu Francis, Joson Varghese, Sajith U K, "Enhancing the Efficiency of Solar Panel Using Cooling Systems," International Journal of Engineering Research and Applications, vol. 7, pp. 5-7, 2017.
16. P.C. Choubey, A. Oudhia and R. Dewangan, "A review: Solar cell current scenario and future trends," Recent Research in Science and Technology, vol. 4, pp. 99-101, 2012.
17. Ravi Prakash, Sandeep Singh, "Designing and Modelling of Solar Photovoltaic Cell and Array," IOSR Journal of Electrical and Electronics Engineering, vol. 11, pp. 35-40, 2016.
18. Sathyanarayana P., Rajkiran Ballal, Lakshmi Sagar P. S., Girish Kumar, "Effect of Shading on the Performance of Solar PV Panel," Energy and Power, vol. 5, pp. 1-4, 2015.
19. Shahzada Adnan, Azmat Hayat Khan, Sajjad Haider, and Rashed Mahmood, "Solar energy potential in Pakistan," Journal of Renewable and Sustainable Energy, vol. 4, pp. -, 2012.
20. Shruti Sharma, Kamlesh Kumar Jain, Ashutosh Sharma, "Solar Cells: In Research and Applications—A Review," Materials Sciences and Applications, vol. 6, pp. 1145-1155, 2015.
21. Sujarwata, Fianti, M.I. Amal, J.Y. Jung, S.H. Lee, K.H. Kim, “Critical Condition in CuInAlSe2 Solar Cell Absorbers,” TELKOMNIKA, vol. 14, pp. 867-872, 2016.
22. Tanvir Ahmad, Sharmin Sobhan, Md. Faysal Nayan, "Comparative Analysis between Single Diode and Double Diode Model of PV Cell: Concentrate Different Parameters Effect on Its Efficiency," Journal of Power and Energy Engineering, vol. 4, pp. 31-46, 2016.
23. Ting L. Chu, Shirley S. Chu, "Recent progress in thin‐film cadmium telluride solar cells," Progress in Photovoltaics, vol. 1, pp. 31–42, 1993.
24. A.Lay-Ekuakille, G. Vendramin, A. Fedele, L. Vasanelli, A. Trotta, "PV Maximum Power Point Tracking Through Pyranometric Sensor: Modelling and Characterization," International Journal On Smart Sensing And Intelligent Systems, vol. 1, pp. 659-678, 2008.
25. Mr. Dinesh S. Borkar, Dr. Sunil.V. Prayagi, Ms. Jayashree Gotmare, "Performance Evaluation of Photovoltaic Solar Panel Using Thermoelectric Cooling," International Journal of Engineering Research, vol. 3, pp. 536-539, 2014.